Precision sliding table saw MJ300V
Technical parameter：Precision sliding table saw MJ300V
|Precision sliding table saw MJ300V
|Push table length
|Maximum height of saw blade
|Maximum diameter of main saw blade
|Slotted saw blade diameter
|Groove saw shaft speed
|Main saw motor power
|Saw motor power
Analysis of the use of Guangdong push table saw matters:
1, will push the table saw around Guangdong and clean up the table.
2, the Guangdong push table saw blade is not sharp, the size of the saw blade is not in a line.
3, commissioning: when about 1 minute, dull things is not normal, procuratorial size blade rotation bias, ensure the saw blade rotation bias accurately.
4, will be ready to put the plate on the bed, the transfer of a good standard.
5, start cutting. Note: plate should be close to the block, can not be moved; according to the thickness of the plate and the hardness of the material to mediate the opening rate, the machine will be uniform, not too fast too fast. Small materials, promote the use of compressed wood, the operator should wear a mask, cannot wear gloves, cannot wear baggy clothes, cannot wear long hair; do not directly by hand to extract beside the saw blade rotation, if necessary, use other long accessories first its push to take.
6, such as out of the corner of the plate has shortcomings, should consider the replacement of the blade.
7, open the task is completed, shut down the power supply.
Aquavie company's main products are: Natural Woodworking Machine, Industrial Woodworking Machine, CNC machines…Our products have high quality, high efficiency and good price. Tel: 0904.36.56.76